Racktime Box For RoyPow 12V 30W Power Bank And Additional Little Things 3D Printer Model
The file 'Racktime Box For RoyPow 12V 30W Power Bank And Additional Little Things 3D Printer Model' is (stl) file type, size is 266.8KB.
The file 'Racktime Box For RoyPow 12V 30W Power Bank And Additional Little Things 3D Printer Model' is (stl) file type, size is 266.8KB.
Tested functional.
You will need something like
1) the ifixit mako precision bit set to be able to screw those close to the corners.
2) and an electric screwdriver compatible
3) a brain
4) patience due to the sequence of screwing that is not obvious at all.
Tested for 1 month with no problem. Nothing broke.
The cover does not stay in place as is.
I used gaffer to maintain it. Else it would fall quite quickly on little jumps.
You may use the BoiteTop.stl as an extension in case the box print failed just mm before the end like it happened to me (end of filament). (use epoxide glue, 3d print upside down)
The file BatPackRoyPow.stl is just the battery volume
Don't hesitate to ask
Used as Power bank for RGB LED strips on my bicycle.
https://www.amazon.fr/gp/product/B08JV6HTLK/ref=ppx_yo_dt_b_asin_title_o03_s01
| BatPackRoyPow.stl | 23.3KB | |
| Boite.stl | 424.8KB | |
| BoiteTop.stl | 684.8KB | |
| Couvercle.stl | 215.3KB | |
| Racktime_Support__H_bone.stl | 183.9KB |
