Rack For Chili Raising Lamps 3D Printer Model

Author: @
License: CC BY
File formats: stl
Download type: zip
Size:405.2KB

The file 'Rack For Chili Raising Lamps 3D Printer Model' is (stl) file type, size is 405.2KB.

Summary

Chilies (e.g. habaneros) need to be planted and grown early in the year.
Since I live in a climate zone where February is still much too cold to raise them outdoors, I use a grow lamp.
To position the lamp optimally above the grow pots, I designed a simple rack.
Only the feet (4x) are printed from flexible filamet if available.
The connectors (2x) from PLA or more stable plastics like PETG...

The wooden sticks (legs) have to be bought additionally.
For my rack I bought 5 standard round bars made of beech wood:

20mm diameter
1000mm length

For my rack I cut the rods as follows:

4 x 900mm ( legs )
1 x 500mm ( crossbars)

However, the lengths of the bars can be freely chosen, depending on your needs. (max 1000mm)

Connector_20mm_rods_aligned_.stl 552.7KB
foot_for_20mm_round_rods.stl 522.0KB