Raccoon In Pedal Bin 3D Printer Model
The file 'Raccoon In Pedal Bin 3D Printer Model' is (stl) file type, size is 357.42 KB.
The file 'Raccoon In Pedal Bin 3D Printer Model' is (stl) file type, size is 357.42 KB.
A small raccoon that lives in a trash can.
Pres the pedal, and the raccoon pushes open the lid and pops out with it's arms extended.
All files were designed to be printed at the size they come in, with a 0.2mm layer height from a 0.4mm nozzle, but feel free to experiment!
RIPB_Bin_Base.stl is the main part of pedal bin. It should be printable without support, but you might want to add it bit of support where the pedal-hole is.
RIPB_Bin_Lid.stl is the lid of the pedal bin, printable without support.
RIPB_Bin_Pedal.stl is the pedal, meant to be printed sideways for a stronger clikcy-bit. Requires a bit of support.
Depending on the quality of the print, the bin_base might require a bit of sanding on the inside for the raccoon not to get stuck, this was not the case for me.
| RIPB_Bin_Base.stl |
| RIPB_Bin_Lid.stl |
| RIPB_Bin_Pedal.stl |
| RIPB_Bin_Raccoon.stl |
