This is a remix of stumpagness Magnetic Hard Case. I did not remix the latch version since it seems to be corrupt.
I just removed some material to be able to fit some soft materiales. This way the console is more protected and you waste less filament.
From the top part (the one where the buttons and screen rest) I removed enough material so you can fit the stock foam cutout.
From the bottom part I just left 2mm of thickness. There I added some yoga mat cutouts I had lying around but any soft material thick enough to fill the gap between the console and the case would work.
Have in mind that if you put too much the case might not close properly.
I used slightly smaller magnets that the suggested ones but they work just fine.
You can use a piece of 1.75mm filament for the hinge.
| R36s-magnet-box-bot.stl | 105.0KB | |
| R36s-magnet-box-top.stl | 159.7KB |
