R2D2 | C3P0 Pull Ball Chain Or Keychain Knob | Handle | Fob | Finials 3D Printer Model

Author: @
License: CC BY-NC
File formats: stl
Download type: zip
Size:11.5MB

The file 'R2D2 | C3P0 Pull Ball Chain Or Keychain Knob | Handle | Fob | Finials 3D Printer Model' is (stl) file type, size is 11.5MB.

Summary

LOOKS LIKE THINGIVERSE IS BROKEN AGAIN AS FAR AS SHOWING IMAGES IN POSTS. YOU CAN SEE IMAGES OF MY REMIXES HERE: https://tinyurl.com/y4redcxv

This Ceiling Fan / Light pull chain knob, handle, finial, fob is designed for use with standard #6 (3.2mm) ball chain. It will also work with smaller chain as long as you use a #6 metal connector.

ANOTHER PAIR PERFECT FOR A CEILING FAN / LIGHT. SHOULD PRINT WITHOUT SUPPORTS.

Simple feed the chain through the top of the print and attach a standard #6 connector to it. If using a ball chain and metal connector, you can form a loop around a keyring and hook with the other end of the connector.

If you don't have a metal connector, you can print the BALL-CONNECTOR.stl file I've included. NOTE: if you print the connector in PLA it's a tight fit. Lay the chain on a hard surface, position the connector over the last ball of the chain and push down until it snaps in place.

You may also use string with a large knot tied in the end.

I usually print things with 10% infill - HOWEVER, if used on a ceiling fan, you may want to use a higher infill for more weight.

I have designed hundreds of remixes. If you want to search by the type, visit my profile: https://www.thingiverse.com/ToaKamate/about

BALL-CONNECTOR.stl 2.0MB
C3P0-Pullchain.stl 17.7MB
R2D2-Pullchain.stl 2.8MB