Quick LED Strip Connector (Customizer) 3D Printer Model
The file 'Quick LED Strip Connector (Customizer) 3D Printer Model' is (stl,scad) file type, size is 156.1KB.
The file 'Quick LED Strip Connector (Customizer) 3D Printer Model' is (stl,scad) file type, size is 156.1KB.
This is a prototype level LED strip connector (not really intended for permanent connections, but ymmv).
There are soldering guides and other types of LED strip connectors but I was not able to find exactly this - something to quickly connect wiring to a strip of programmable LEDs (eg Neopixels [WS2812], Dotstar [SK9822], etc) - no soldering, no special Dupont wires required, etc. Just strip a bit of insulator off the end of your wires and they quickly connect to the led strip. Perfect for some quick testing, prototyping, or just fooling around. Quickly disassembles, just pull wires and LED strip out.
Stranded wire may need a bit more care and tweaking to some parameters - solid core is also easier to insert into headers or breadboards.
Currently supports 10mm wide LED strips with 3 or 4 connections, but easily extended to support other options as needed.
There are two styles to pick from, a split model with snap connects, and a single body model. Adjust parameters and tolerances according to the capabilities of your printer and the filament in use.
| led-strip-connector-4pin.stl | 137.4KB | |
| led-strip-connector-bottom.stl | 35.4KB | |
| led-strip-connector-one-piece.stl | 95.8KB | |
| led-strip-connector-solid-4pin.stl | 126.8KB | |
| led-strip-connector-split.stl | 105.4KB | |
| led-strip-connector-top.stl | 70.0KB | |
| led-strip-connector.scad | 6.1KB | |
| led-strip-connector.stl | 201.8KB |
