Quick-Fit X Carriage Lowprofile LM8UU 3D Printer Model

Author: @
License: CC BY
File formats: skp,stl
Download type: zip
Size:199.7KB

The file 'Quick-Fit X Carriage Lowprofile LM8UU 3D Printer Model' is (skp,stl) file type, size is 199.7KB.

Summary

This is a new version of the excellent quick-fit x-carriage from Richrap :)

I tried to make it smaller so I designed the fixation to be perpendicular to the X axis and won around 3cm, it's not a big deal but 3cm on a 22x22cm build plate is really huge.

Here is a LM10UU version http://www.thingiverse.com/thing:24986

Original Carriage:

  • 12cm long alone
  • 13cm long with one fan

Low profile is:

  • 8,5cm long alone
  • 9,7cm long with one fan
  • 11cm long with two fans

So stay update :)

Update Septembre 13th:

  • Removed old confusing files.

Update June 19th:

  • REVISION, Files prefixed with R2.
  • Updated to new design.
  • Added Belt clamps (compatible with LM10UU version too)

Update June 8th:

  • Fixed the holder size.
  • Added sketchup files.
  • Added ready-to-print stl.

Update:

  • Won again 4mm on the length
  • Re-inforced the latch bearing holder.
  • Fixed the manifold.
  • Fixed the distance between axes from 51mm to 50mm as linear bearings are push-fits it needs to be accurate.
  • Added Quick-Fit supports for 40x40mm fan mount, with 2 heights.
  • Re-inforced the plate.
R2-Quick-Fit-Belt-Clamp-v1.skp 36.6KB
R2-Quick-Fit-Belt-Clamp-v1.stl 111.3KB
R2-Quick-Fit-Support-Part-LM8UU-v1.skp 143.8KB
R2-Quick-Fit-Support-Part-LM8UU-v1.stl 532.8KB
R2-Quick-Fit-Tensioner-Part-LM8UU-v1.skp 119.2KB
R2-Quick-Fit-Tensioner-Part-LM8UU-v1.stl 435.2KB
removeable_fan_mount.skp 43.2KB
removeable_fan_mount.stl 128.8KB
richrap_latch_only_lower.stl 19.7KB