Quick Change Sanding Blocks 3D Printer Model Free Download

3D Printer Models

Quick Change Sanding Blocks 3D Printer Model

Author: @Cavedog

License: CC BY

File formats: STL

Download type: zip

Size:181.1KB

The file 'Quick Change Sanding Blocks 3D Printer Model' is (STL) file type, size is 181.1KB.

Description Files (2)

Summary

This is a quick change sanding block I designed. To use this tool:

cut the sand paper to the length described below
place the bottom of the sanding block on the center of the sand paper
wrap the edges of the sand paper up sides and around the top round edges
press the tensioning block down from above, this will snap into place and tension the sand paper

To replace the sand paper:

Slide the tensioning block out sideways

These are 3.7" long in order to use a standard 3.7" x 9" precut sand paper piece. Paper cut length for the 2" wide block is 4.5" (half sheet), cut length for the 1" block is 3.5".

This can be printed with an 0.6mm nozzle, however I recommend a 0.4mm nozzle.

SANDING_BLOCK_1_asm.STL	238.4KB
SANDING_BLOCK_2_asm.STL	239.9KB

Quick Change Sanding Blocks 3D Printer Model

Summary

Tags

You might also like