Question Block – Easy To Print 3D Printer Model
The file 'Question Block – Easy To Print 3D Printer Model' is (stl) file type, size is 88.97 KB.
The file 'Question Block – Easy To Print 3D Printer Model' is (stl) file type, size is 88.97 KB.
Modern design of the famous Super Mario Bros Question Block!
Easy to print (no support need at all) with good results.
The block dimensions are 10 x 10 x 10cm (3.9 x 3.9 x 3.9") at 100% scale.
I recommend to print a 80% scale if you want the SD Cards / Switch cartridges version (slots dimensions are designed to fit perfectly at that scale).
Customizable: depending on the printed parts, you can use it like a coin box, a storage box, a SD cards / Switch cartridges optimized storage, or even a desk lamp!
Two types of storage are available:
Type 1 - For Switch cartridges / SD Cards, Micro-SD Cards and generic storage spaces
Type 2 - Simple storage space
/! Caution: if you use the Type 1 configuration, you must change the scale of all parts to 80% /!
Desk Shrooms seen on the first picture (thing:1375575) is designed by AndrewBougie.
| Cube.STL |
| Interrogation_point.STL |
| Storage_type_1.STL |
| Storage_type_2.STL |
| Top.STL |
