Quadwich180 – Quadcopter Sandwich 3D Printer Model Free Download

Description Files (9)

Summary

This is a multilayer "sandwich" quadcopter, 180 sized, greatly inspired from Sigan 180 and bauerman design.

Follow me on twitter & facebook to see my other design progress :

https://twitter.com/hicwic
https://www.facebook.com/hicwicen
Designed to be easily printed, with no supports needed. Fit on a 200x200 printer bed.
It's made to fit 1806 or 1804 motors (M2 motor screw hole) and 4 inch props.
Camera support is made to be sandwiched with 30mm spacers between top and hat part. 3 mount angles available 0, 15, 30 degree.

BUILD INSTRUCTIONS
Part list :

8x M3x8 screws
16x M3x6 screws
4x 30mm spacers (alu or nylon)

1- Screw the bottom plate to the spacer from downside with M3x8 screws, directly in plastic. DO NOT overthight !
2- Screw the 30mm spacers to top plate from inner side.
3- Install electronics components
4- Screw top plate to spacer from upperside, directly in plastic with M3x6 screws. DO NOT overthight !
5- Screw Hat to 30mm spacers with M3x6 screws.

UPDATE 28/06/16 - 12h08 added a new top in remixes with buzzer holder and battery delimiter

UPDATE 17/06/16 - 00h10 replaced spacer v7

Sightly bigger hole for fpv antenna & renforcement around fpv antenna hole
Added facebook address for followers

UPDATE 11/06/16 - 23h50 replaced Top v9.

Reduce motor main hole to fit 1804-1806 perfectly
Added a version with extended XT60 holder.
Added some build instructions

UPDATE 10/06/16 - 22h12 replaced Hat v6, Top v6 and camera support V4

Correct a problem in front screws position. Those version are deprecated.

Feedbacks are welcome.

BottomPlate.dxf	24.4KB
Quadwich180_Bottom_v6.stl	214.7KB
Quadwich180_CameraSupport_v10.stl	10.0KB
Quadwich180_Hat_v11.stl	147.0KB
Quadwich180_Top_v10.stl	214.9KB
Quadwich180_Top_v10_+_XT60holder.stl	216.7KB
Quadwich_Spacer_15mm_v1.stl	301.6KB
Quadwich_Spacer_v9.stl	301.6KB
TopPlate.dxf	15.1KB

Quadwich180 – Quadcopter Sandwich 3D Printer Model

Summary

Tags

You might also like