!! Important !!
the rear arms are different:
back-arm-left: has tilt
back-arm-right: no tilt
you have to choose one and mirror ist in cura.
This is the better and stable Version of my Quadrocopter - Explorer V1.
http://www.thingiverse.com/thing:1998043
i split the top and bottom parts because i have a max. 190mm print-area
You need:
4 x M6 screws and bolts for the arms (20 mm)
16 x M4 screws and bolts for the motors (16 mm)
4 x M4 screws and bolts for the top joiner (12 mm)
4 x M4 screws and bolts for the bottom joiner (12 mm)
2 x M4 screws to join the top and bottom front (12 mm)
5 x M4 screws to join the core (mittel part) and bottom (16-18 mm)
2 x M4 screws to fix the top core (12 mm)
4 x M4 screws and bolts the fix the BEC an the FC (Naze32), use the spacer (20-30 mm)
Don´t forget to secure the cabels over the arms.
I use:
| arm-back-left.stl | 2.2MB | |
| arm-back-right.stl | 2.6MB | |
| arm-fron-right.stl | 2.0MB | |
| arm-front-left.stl | 2.0MB | |
| core-bottom.stl | 684.4KB | |
| core-top.stl | 578.7KB | |
| core.stl | 2.1MB | |
| front-bottom.stl | 848.8KB | |
| front-top.stl | 7.7MB | |
| joiner-bottom.stl | 544.2KB | |
| joiner-top.stl | 485.1KB | |
| spacer_3mm.stl | 281.3KB |
