Quadcopter Frame 3D Printer Model
The file 'Quadcopter Frame 3D Printer Model' is (STL) file type, size is 1.1MB.
The file 'Quadcopter Frame 3D Printer Model' is (STL) file type, size is 1.1MB.
Quadcopter frame with removable components and shock absorbing landing gear.
Need to print 1 base, 1 top, 4 arms, 4 legs.
Can only accept 5 inch propellers.
I designed it to be able to print on my M3D printer so the parts are fairly small.
Uses 12 - 5/8 inch long #4 screws or similar to attach the arms to base.
4 - 7/8 inch long #4 screws to attach landing leg to arms
May need washers for each screw
Need 16 - #4 nuts, self locking if you can get them, or use some blue thread locker.
Need 4 - springs 1/4 inch internal diameter and about 1 1/4 inches long.
I originally wanted to use the kk260 FPV plate but that didn't end up working so I redesigned the base and added a top, it will still need extensions from that kit or extensions that are about 1/8 inch in diameter.
| quadarm3.STL | 2.0MB | |
| quadbase.STL | 1.2MB | |
| quadleg.STL | 23.8KB | |
| quadtop.STL | 94.6KB |
