atv lightbars, print it with brims and supports,8 mm shell thickness 10% infill after first 3-5 mm so it will hold the screws solid as possible in %100 filled body.Cob daytime 17cm leds fixed with double sided tape and 2 pieces fixed together with m3 bolts and screws, mirror the file for the upper piece on the other side as you g coding it.Under part don't need any flip op. so it will fit on both sides.The Pipe diameter is 25mm
| n_far_kasa.stl | 14.1MB | |
| on_far_alt.stl | 7.7MB |
