This remix improves compatibility with Volcano style or other longer nozzles, and you can keep the bed leveling switch.
Removed the raised portion around the rear screws of the cooler frame to allow for mounting of the leveling switch mounting fixture with the stock screws.
Added 3.25mm to the duct height, to direct the air flow further down, as I'm using a nozzle melt zone extender with a standard 0.4mm nozzle.
(melt zone extender: https://www.amazon.com/gp/product/B0CGTSNFNJ/ )
The sharp end of the duct does not slice/print well with Arachne perimeter generator turned on, so I switched to Classic and enabled Detect thin walls. (PrusaSlicer v2.7.1)
My previous part cooler broke, so I printed in PLA, mounted, then printed in Prusament orange ASA for better temperature resistance.
| Part_cooler_frame_v2.1.stl | 266.1KB | |
| _part_cooler_duct_longer_v2.1.stl | 130.0KB |
