Remixed from:
https://www.printables.com/model/643354-qidi-x-plus-3-carbon-filter
Thanks to gmaranda
Things you’ll need.
The 3D-Model
Sealing tape. (I had one laying around)
FAN_SPACER_v1.stl
https://www.thingiverse.com/thing:6237118
Thanks to D3adKenny
Air Filter for Flashforge Adventurer 4 Series, 80x80x10mm, e.g. Aliexpress
You can use the original screws.
You must remove residues from the injection molding, I used a soldering iron. Very easy.
Measure the distance for the sealing tape on the back plane
Happy tinkering
Have fun! 😊
| QIDI_X-Plus_3_airfilter.step | 61.9KB | |
| QIDI_X-Plus_3_airfilter.stl | 46.6KB |
