Qidi X-Smart Print Scraps Bin 3D Printer Model
The file 'Qidi X-Smart Print Scraps Bin 3D Printer Model' is (stl,3mf) file type, size is 37.2KB.
The file 'Qidi X-Smart Print Scraps Bin 3D Printer Model' is (stl,3mf) file type, size is 37.2KB.
I saw a model that someone had made to collect post-print junk that gets scraped off the print surface, but it was for one of the larger Qidi models. I decided to measure and create my own version for the X-Smart. It is designed to fit inside the notch of the two body rails, and sit just in front of the build plate so you can scrape off parts right into the bin.
I printed this with PETG for extra heat resistance, since that was the best material I had laying around other than PLA. Seeing as the X-Smart doesn't have a heated chamber, I assume this will enough for any temps the inside the unit will reach.
Note- this is a part for the X-Smart that doesn't actually fit on the X-Smart print bed, so I've provided a Qidislicer project file that includes the model split up into two parts with a deovtail, as well as mild supports.
| print_junk_collector.stl | 33.6KB | |
| Qidi_X-Smart_print_scraps_bin.3mf | 29.4KB |
