Qidi Tech / Flashforge Creator Pro Body Panel Corner Cap / Saver / Cover 3D Printer Model
The file 'Qidi Tech / Flashforge Creator Pro Body Panel Corner Cap / Saver / Cover 3D Printer Model' is (STL) file type, size is 81.3KB.
The file 'Qidi Tech / Flashforge Creator Pro Body Panel Corner Cap / Saver / Cover 3D Printer Model' is (STL) file type, size is 81.3KB.
I created this part due to the fact that there was gap at the top of the printer in the sheet metal corners. I dropped a screw down there once and that had bothered me. These may help to keep the heated air in the printer as well, I haven't tested the theory but it is sound since I have held my hand over the corners while printing ABS and a decent amount of heat was escaping from those locations. They could provide extra frame strength as well, but I'm not sure if it's needed.
The normal piece is for the two front corners and back left corner
The piece with a section cutout is for the back right as the bearing mount was in the way for the original piece on my machine
| housing_corner_cover.STL | 109.6KB | |
| housing_corner_cover_slim.STL | 108.6KB |
![Store Window Set [playfab 184002 – Playmobil Compatible] 3D Printer Model](https://cdn.3axis.co/assets/5f/21/3f/37/5f213f37-110b-45c5-bc3c-6e455644f7e2/images/549a5879-7b1c-4b5b-a507-2331fe7046c4_thumb.jpg)
