The spacer prevents the PTFE tube from scratching the cover. However, as all the spacers I found were made of four individual parts or had to be glued, I created a version where you can attach two parts together with a dovetail and also detach them again. In addition, the spacers I used were all too big or too small. I therefore adjusted this spacer a little so that it fits me very well.
I printed the spacer with PETG. Both my printer and the filament are calibrated.
The left and right parts have to be printed twice each.
Qidi_Q1_Pro_-_spacer.stl | 552.9KB | |
Qidi_Q1_Pro_-_spacer_left.stl | 196.9KB | |
Qidi_Q1_Pro_-_spacer_right.stl | 356.1KB |