Qidi Q1 Pro 360° Part Cooler Duct 3D Printer Model
The file 'Qidi Q1 Pro 360° Part Cooler Duct 3D Printer Model' is (stl,step) file type, size is 3.2MB.
The file 'Qidi Q1 Pro 360° Part Cooler Duct 3D Printer Model' is (stl,step) file type, size is 3.2MB.
Update 22.12.2024:
The airflow is much better than before, so try it out and please give feedback. I have use it for many houres now.
When you remove the fan duct from the front case, remove the screws from the fan and from the front case. The original fan is glued in, so please be careful not to break anything.
You can glue in the new duct or just fix it with the two screws on the left and right.
Please note that i do not have a regular 5015 fan available yet so the duct has not been tested for this, but it should work the same.
Print in heat resisdent filament like PETG/ASA/ABS and so on because it is in the hotzone from the nozzel.
Happy Printing!
| Qidi_Q1_Duct_round_fan_5015_.stl | 1.9MB | |
| Qidi_Q1_new_Duct_round_fan_original_lip_v2.step | 491.4KB | |
| Qidi_Q1_new_Duct_round_fan_original_lip_v2.stl | 2.4MB | |
| Qidi_Q1_new_Duct_round_fan_original_v2.step | 453.1KB | |
| Qidi_Q1_new_Duct_round_fan_original_v2.stl | 2.4MB |
