Qidi Plus4 Riser 3D Printer Model Free Download

Description Files (20)

Summary

This riser is still a work in progress, things might change after testing it out for a while. A new design is already started for when the AMS hits the stores, but without being able to test it I will not upload the new version.

Update 11/10/2024:

Uploaded modified parts 1 - 4
You can find them as parts 1 - 4 V2
Resized them in the middle section, where the PTFE tubing was rubbing against it. With these new parts there's no need to print out plug #3, but you need 2 more of plug #2

I made this riser because I noticed the ptfe-tubing was rubbing the bottom of the glass and I was getting a bit annoyed having to find a place to put the glass when printing with PLA/PETG/TPU.

NOTE:

You will NOT be able to use the filament holder as the riser is a couple mm extended to the back.

For this riser I used :
Eryone's ABS+
Plumbers glue for PVC piping (Bison)

Print all the parts in the list
Print lock1 twice if you glue them in place
Print all the plugs twice

How to assemble :

Base Plate :
Attach part 1 and part 2 together using the designated plugs. There's no need to use glue to hold them together.
Do the same for part 3 and part 4.

Now put the assembled parts together with the 2 largest plugs.
Top Riser
Glue Part 5 and Part 6 together by applying some glue to the side, use lock 1 to hold pieces in place while drying or you can glue the lock piece as well. It’s all up to you. Glueing the lock piece in might make it a bit stronger.
Do the same for the mirrored parts (part 7 and part 8)

Glue Part 9 and Part 10 using the lock 2 piece to hold it in place or just glue the lock as well.
Riser assembly
Position the assembled part from step 2.a and glue it on the base plate. Use 2 or three small bar clamps to hold it in place while drying, if you use the same method as I did it’s only a matter of minutes before the parts are sturdy enough to remove the clamps.
Use the same method to glue the other 2 remaining parts to the base plate.

lock1.stl	31.9KB
lock2.stl	42.1KB
Part_1.stl	18.9KB
Part_10.stl	137.7KB
Part_1_V2.stl	18.3KB
Part_2.stl	15.5KB
Part_2_V2.stl	14.8KB
Part_3.stl	47.7KB
Part_3_V2.stl	47.1KB
Part_4.stl	15.5KB
Part_4_V2.stl	36.4KB
Part_5.stl	194.5KB
Part_6.stl	138.9KB
Part_7.stl	194.5KB
Part_8.stl	192.7KB
Part_9.stl	117.1KB
plug_1.stl	3.4KB
plug_2.stl	3.4KB
plug_3.stl	3.4KB
Qidi_Plus4_Riser_v1_assembly.pdf	80.6KB