Qidi Magnetic Door Stop; 10mm Magnet 3D Printer Model
The file 'Qidi Magnetic Door Stop; 10mm Magnet 3D Printer Model' is (stl) file type, size is 141.3KB.
The file 'Qidi Magnetic Door Stop; 10mm Magnet 3D Printer Model' is (stl) file type, size is 141.3KB.
Just another door latch for the QIDI printer. Tolerances are quite tight, so I printed in ABS and it was snug but useable after cool-down.
Takes a 10mm disk magnet with a 2mm depth, press to fit. There is 1mm material between the magnet/handle and the QIDI printer body/window. I was able to use the original mounting screws.
Note: oh right - I made the through-holes for the handle for 3mm screws instead of 4mm, but they ream out to 4mm easily.
| QIDI_magnetic_door_stop.stl | 451.2KB |
