Here is a set of covers to plug the unused holes/ports behind the printer and make the print chamber a little more airtight.
The model was designed to be printed in PP (Polypropylene) and designed to take into account a post-printing shrinkage of 1%. You can print the parts in PLA by scaling like this:
-Ethernet port Coverage: 99.5%
-Belt tensioner Cover: 99%
-Top Right hole: 98.5%
It is possible to print the parts with other materials, however it may be necessary to adjust the scalling to have a press fit adjustment.
You will need :
2x Qidi 4 Plus Belt acces cap
1x Qidi 4 Plus Hole cap
1x Qidi 4 Plus ethernet port cap
| Qidi_4_Plus_Belt_acces_cap.stl | 23.3KB | |
| Qidi_4_Plus_ethernet_port_cap.stl | 111.6KB | |
| Qidi_4_Plus_hole_cap.stl | 117.9KB |
