QAV-M 110 Micro Quad FT Gremlin Frame 3D Printer Model

Author: @
License: CC BY
File formats: stl
Download type: zip
Size:188.7KB

The file 'QAV-M 110 Micro Quad FT Gremlin Frame 3D Printer Model' is (stl) file type, size is 188.7KB.

Summary

With the new micro quad scene emerging I have modeled a 110 version of the QAV210 frame to be used either with EMAX power pack micro system or your standard 1104 mount.

There is also a second top plate with more clearance for the larger emax 2345BN props

All you need are nylon stand offs for the vertical posts. The model uses M3 standoffs

https://www.amazon.com/180Pcs-M3-Hex-Spacers-Screw-Nut-Standoffs-Quadcopter-Drone-Raspberry/dp/B01I0SORIE/ref=sr_1_2?s=hi&ie=UTF8&qid=1494106444&sr=1-2&keywords=m3

Lots of fun, hope you like it as much as I do.

https://youtu.be/Bl26f9nuWLA

For this build I used the EMAX micro brushless power pack system:

  • EMAX Femto F3 Flight Controller+PDB Board
  • 4x EMAX Bullet 6A BLHeli_S ESC (1S-2S Support)
  • 4x EMAX RS1104 5250kv Brushless Motors
  • EMAX T2345BN Props

  • Airblade TQ169 AiO VTX/Camera http://bit.ly/2r5lMsL
  • Frsky XM+ Receiver http://bit.ly/2r9kVSF

But then one of my motors died, so I swapped them to standard 1104 motors:

20x26FC_base_plate_with_EMAX_motors.stl 225.1KB
20x26FC_base_plate_with_standard_motors.stl 227.4KB
Base_Plate_EMAX_1104_motor_mount_8.4mm.stl 225.1KB
Base_Plate_standard_1104_motor_mount_9mm.stl 227.4KB
cable_holder.stl 18.8KB
TOP_PLATE_2.stl 75.7KB
TOP_PLATE_2_EMAX_2345.stl 73.3KB