3D print a case for the Adafruit PyPortal! Build a portable IoT project using Adafruit's PyPortal and PowerBoost. Get started with circuit python and program hardware with a touch screen display!
The enclosure features snap fit covers and a bracket for securing all the components. Secure the PCBs to the 3D printed case with machine screws. The back cover snap fits and features a spot for a bigger speaker. There’s also a nice cut out for the micro SD card slot. You can use a toggle switch to power the device on and off. You can also recharge the lipo battery over USB. The face plates can be swapped out so you can build a custom keypad.
Learn guide, documentation, code:
https://learn.adafruit.com/pyportal-case/
https://learn.adafruit.com/adafruit-pyportal
Get Adafruit PyPortal https://adafru.it/4116
Adafruit PowerBoost 1000C
https://www.adafruit.com/product/2465
Mini Oval Battery
https://www.adafruit.com/product/3923
1200mAh lipo battery
https://www.adafruit.com/product/258
Panel Mounted Switch
https://www.adafruit.com/product/3221
| pyp-back.stl | 156.6KB | |
| pyp-box.stl | 102.5KB | |
| pyp-bracket.stl | 130.4KB | |
| pyp-keyPlate.stl | 111.6KB | |
| pyp-top-blank.stl | 19.4KB |
