PVC Star Corner Connectors 3D Printer Model

Author: @
License: CC BY-NC
File formats: stl
Download type: zip
Size:598.8KB

The file 'PVC Star Corner Connectors 3D Printer Model' is (stl) file type, size is 598.8KB.

Summary

Summary:

Print these corners and connect 1/5" PVC pipe to make a star shape. Wrap it with lights or stick on a light strip and you are good to go!

Instructions:

Print 5 outside corners at least. Cut your PVC pipe lengths to accommodate the size star you need. Weave the pipe to connect the corners or use 5 inside corners. I made a variant of the inside corners to allow a pipe to pass all the way through. Depending how you hang it, this provides much better support if you are making a relatively large star.

Use pan-headed screws with a flat bottom or you will split the connectors. You can also glue the connections for a permanent assembly.

108deg_Star_angle.stl 490.2KB
108deg_Star_angle_trough.stl 666.5KB
Star_Corner.stl 388.8KB