Paul Tibble's Pipe Connectors were brought to my attention when I responded to a request for help with modifying the OpenSCAD program he had written to allow the user to extend one of the lengths of a three segment connector. I was impressed by Paul's design.
That said, I couldn't help but tinker. My version is designed from the ground up in OpenSCAD. I have eliminated the need for multiple "things". You can configure each of three axis to have from zero to two segments each.
While the uploaded models can be useful, if you have any skill with OpenSCAD or care to brave the Customizer you can modify many of the parameters of this model to suit your needs. See the information below for how to build and configure this model.
Please post pictures if you print this model.
Let me know if you have any questions or concerns.
Thank you to Paul Tibble for the inspiration for these models.
| PVC_.375_inch_1_-_End_Stop.stl | 6.0MB | |
| PVC_.375_inch_Couplers.zip | 2.3MB | |
| PVC_.5_inch_2_-_Elbow_Coupler.stl | 3.4MB | |
| PVC_.5_inch_Couplers.zip | 2.3MB | |
| PVC_.75_inch_2_-_Straight_Coupler.stl | 438.6KB | |
| PVC_.75_inch_Couplers.zip | 2.3MB | |
| PVC_1.25_inch_3_-_T_Coupler.stl | 890.9KB | |
| PVC_1.25_inch_Couplers.zip | 2.3MB | |
| PVC_1.5_inch_4_-_Edge_Coupler.stl | 1.1MB | |
| PVC_1.5_inch_Couplers.zip | 2.3MB | |
| PVC_1_inch_3_-_Corner_Coupler.stl | 2.3MB | |
| PVC_1_inch_Couplers.zip | 2.3MB | |
| PVC_2.5_inch_5_Coupler.stl | 1.5MB | |
| PVC_2.5_inch_Couplers.zip | 2.3MB | |
| PVC_20_mm_Couplers.zip | 2.4MB | |
| PVC_25_mm_Couplers.zip | 2.4MB | |
| PVC_2_inch_4_-_Flat_Coupler.stl | 1.3MB | |
| PVC_2_inch_Couplers.zip | 2.3MB | |
| PVC_32_mm_Couplers.zip | 2.4MB | |
| PVC_3_inch_6_Coupler.stl | 1.8MB | |
| PVC_3_inch_Couplers.zip | 2.3MB | |
| PVC_4_inch_Couplers.zip | 2.3MB | |
| PVC_50_mm_Couplers.zip | 2.4MB | |
| PVC_63_mm_Couplers.zip | 2.4MB | |
| PVC_6_inch_Couplers.zip | 3.2MB | |
| PVC_Pipe_Coupler.scad | 6.2KB |
