This is a remix of "Puzzle of Evil"
I love this puzzle, but it can be a little frustrating because the pieces are thin and I can't pick it up well. Therefore, I remix the pieces with twice the thickness. The body is not doubled, but only slightly increased. (12 mm to 15.5 mm) by making the bottom thinner.

In addition, I have made some important changes. In terms of both design and function, I was able to finish this thing with a fairly high degree of perfection.

[change points]
-doubled the thickness of the pieces
-thin hinge
-magnet size free with magnet pockets (maximum size: diameter 8 mm x thickness 3 mm)
-smaller body by cutting off unnecessary peripheral portions

[note]
I have attached three files with different hinge clearance sizes. The recommended printing method is to print normal first, and if you feel that there is a lot of clearance, try narrow. If the hinges get stuck, try wide.
-Evil_Puzzle_thick_hingeClr_narrow.stl
-Evil_Puzzle_thick_hingeClr_normal.stl
-Evil_Puzzle_thick_hingeClr_wide.stl

[recommend]
-Magnets can be used up to 8mm x 3mm, but it is recommended to put the magnet in the magnet pocket and check the attractive force of the magnet before gluing.

-If you are using PrusaSlicer, try "Hilbert Curve" as the bottom infill pattern. This will be a very beautiful pattern. In particular, metallic filaments such as silver are recommended.
You can see the pattern in the pictures.
(Print Setting > Infill > Infill > Bottom fill pattern > Hilbert Curve)

[revision]
2022/11/10
I seem to have deleted the magnetic pocket cap file during the last update.
I added this file. Additionally, I have added two photos.

2022/04/09
I changed the angle of the hinge cone to prevent stacking when printing.
I also made a few other design changes.

2021/05/27
I changed the file names for easy understanding.

2021/05/09
I added 6 files.
The four files are individual piece files. ex. Evil_A_thick.stl
The two files have increased hinge clearance.

2021/05/01
I added one file "Evil_magnet_pocket_cap.stl" This is a cap to close the magnet pocket.

Please enjoy puzzle !!