Puzzle Fish 3D (w/ Magnets) 3D Printer Model
The file 'Puzzle Fish 3D (w/ Magnets) 3D Printer Model' is (stl) file type, size is 1.9MB.
The file 'Puzzle Fish 3D (w/ Magnets) 3D Printer Model' is (stl) file type, size is 1.9MB.
Hello Guys!
To build this Puzzle fish, you will need to glue in 12 neodymium magnets with a height of 3 mm and a diameter of 6mm.
You can find those on ebay (cheaper) or amazon (faster). They should cost below 10$ or even around 2$.
Be sure to glue them in with a secure adhesive, for example a two component adhesive.
If you wont do this properly, you risk that the younger ones will swallow the magnets.
This was an educational project. I created this for a school of disabled children.
It should help with Eye-Hand-Coordination.
I already printed this on my own printer and it works out great!
I would we proud if you share your makes or leave a comment.
Greets, Julian
| FISCH_PUZZLETEIL_H_FINAL2.stl | 4.0MB | |
| FISCH_PUZZLETEIL_V_FINAL2.stl | 6.5MB | |
| HINTERE_FLOSSE_FINAL.stl | 2.8MB | |
| LINKE_FLOSSE_FINAL.stl | 1.2MB | |
| OBERE_FLOSSE_FINAL.stl | 1.4MB | |
| RECHTE_FLOSSE_FINAL.stl | 1.1MB |
