I took the Spin Cube and ran an experiment with nTop. I subtracted a gyroid unit cell pattern from it. The idea was simple: make the spinner cooler. But then, as I was at school, the spinner unexpectedly fell apart in my pocket. Outcome? A new creation: The Puzzle Cube. From a fun idea with the Spin Cube to this unexpected result, the journey has been interesting. Check it out!

I should let you know that it took me about another hour to put it back together, but it can be done with patience.

The "Delicate" model was the first decorative version of this model, and then after some testing, I decided to make the "Robust" iteration with thicker arm sections around the middle open ring.

Please print this model at a minimum of 215°C, it is a functional puzzle and I have found from experience printing at the likes of 200°C leaves the PLA too fragile for this use case.

{Description}

The small size and short printing time make it ideal for trial 3D printing.

Print flat on any given face of the cube.

Print in Place with no supports.

Print at 215° minimum.

Print at 30mm/s maximum.

Please take pictures of your Puzzle Cube and share them with us!

⚠Warning⚠

Be careful in environments with young children and pets!

This model contains small parts.

If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury.

If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!

Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries.

In addition, debris from damage to the model may be accidentally ingested by infants or pets.

If the model is damaged, dispose of it immediately.

Store them in an appropriate place.

After 3D printing, store the model in an appropriate place out of reach of young children and pets.

Proper adherence to the precautions will ensure the safe use of the model.