Push Stick For Smaller Printer Beds 3D Printer Model
The file 'Push Stick For Smaller Printer Beds 3D Printer Model' is (stl) file type, size is 42.1KB.
The file 'Push Stick For Smaller Printer Beds 3D Printer Model' is (stl) file type, size is 42.1KB.
Since all the available designs on this site are way too big for my printer bed (200x200), I decided to make a push stick that would fit. I modeled this push stick from scratch but used the PushStick_10mm.stl from Lindh3d as the template, so it's not an exact copy with just a split in the middle but not my original idea, either.
I left the tolerance tight (depending on your printer, of course) at 0.25mm at the split as you do not want this slipping apart while pushing wood through the table saw. I am able to lean my body weight into the push stick against the edge of a table with little flex. Hopefully, you won't be pushing this hard on a piece of wood. It may be easier to store in separate pieces, but I would highly recommend using a strong glue or welding the pieces together to be extra cautious.
I suggest printing with at least 3 perimeter shells and 25% infill.
Buy me a coffee - https://paypal.me/mellowsnus
| pushstick1.stl | 133.3KB | |
| pushstick2.stl | 72.7KB |
