A push in place door sealing strip for the Qidi Plus 4.
This strip closes the fairly large gap to the left side of the glass door on the Qidi Plus 4. The strip is designed to squish a bit as it is pushed into place, and then expand behind the door's glass to grip and hold itself in place, as well as seal the gap fairly effectively.
Best when printed in your favorite brand/color of 95A TPU
This strip is pushed into place when the glass door is closed. Position the strip starting from the bottom of the gap on the left side of the door. Push the strip into place, and then run your finger firmly up the length of the strip until it is pushed into place along the entire gap length. Run your finger once more over the length of the strip to ensure it is seated firmly in place.
Removal is as easy as grabbing the strip from the top and pulling outwards and down.
Both STL and 3MF formats for the strip are supplied.
| Door-Seal-Strip.3mf | 141.6KB | |
| Door-Seal-Strip.stl | 75.1MB |
