Pumpkin With Legs 3D Printer Model
The file 'Pumpkin With Legs 3D Printer Model' is (stl) file type, size is 613.7KB.
The file 'Pumpkin With Legs 3D Printer Model' is (stl) file type, size is 613.7KB.
This Pumpkin with print in place legs was made by Juno1551 (https://www.thingiverse.com/thing:5563354) and looked like it would be good to try to make into a dual color print, using different colors for the legs. At first the stl model did not have the legs separated and had mesh errors. So I fixed those and worked on separating the legs from the rest of the pumpkin body. with that done i also separated the top stem so i could print it in a different color. After my first print i found the legs still stuck to the body due to the angles at the top of the legs not good to print without supports.
to print import the models into the slicer and make the body at 0,0,0. the legs need to be offset by +/- 9.5mm, the stem needs to be at 37.5mm up in Z and rotated 90 deg (not sure why the saved model got rotated but it did)
UPDATE added a new version that allows the legs to lock down and the pumpkin to stand
| PumpkinBody5.stl | 1.1MB | |
| PumpkinLtLeg5.stl | 116.7KB | |
| PumpkinRtLeg5.stl | 119.4KB | |
| PumpkinStem2.stl | 115.9KB |
