PS5 Controller Charging Caddy 3D Printer Model
The file 'PS5 Controller Charging Caddy 3D Printer Model' is (stl) file type, size is 563.8KB.
The file 'PS5 Controller Charging Caddy 3D Printer Model' is (stl) file type, size is 563.8KB.
Needed a controller caddy/charging station that would fit into the storage bin of our recliner. Whipped this up. We have three players so made it for 3 controllers, but if folks want I could easily modify to be 2 controllers or 4 controllers.
There is a hidden compartment in the back that holds a USB charger, and channels that allow the USB cables to go from the charger area to the controllers.
I designed the compartment to fit this old Anker charger I had lying around (https://www.amazon.com/Anker-5-Port-Charger-PowerPort-iPhone/dp/B00VH958F0) but I'm there are others that fit.
I used 1ft-long USB cables to run through the channels, but you can go longer if that's what you have on hand.
I printed this all out of PLA. Some supports are required - I used organic support and they worked very nicely and removed easily.
I also have a 1/4" hole running through the base of the handle and the top of the caddy to allow for a dowel to be slid through to secure it, but mine fit tightly enough that it wasn't necessary.
| ps5_caddy_-handle.stl | 220.8KB | |
| ps5_caddy_-sliding_door.stl | 4.4KB | |
| ps5_caddy_-_everything.stl | 988.1KB | |
| ps5_caddy_-_main_body.stl | 744.2KB | |
| ps5_caddy_-_wire_cover.stl | 18.9KB |
