PS4 Pro Wall Mount 3D Printer Model
The file 'PS4 Pro Wall Mount 3D Printer Model' is (stl) file type, size is 32.8KB.
The file 'PS4 Pro Wall Mount 3D Printer Model' is (stl) file type, size is 32.8KB.
This is a simple wall mount for the PS4. There are 2 parts, the bigger one is stronger and is designed to hold the weight of the PS4, while the smaller one has a hole to secure the PS4 (PS4 has a small hole on the bottom for the M3 screw) to prevent it from sliding. It is designed so that PS4 will slide in from the side when everything is mounted on the wall. Unless, you decide to add RGB strip on the back. In that case, you will have to put the strip on the very edge of the PS4 to allign it with the designed holes and place the top holder on the very edge (or not screw it in all the way to the wall and just let it slide up-down) and tjust magically slide it in depending on how you mounted the RGB strip. Anyway, if you don't intend to use the RGB strip, using this will be pretty straight forward. After printing,
| ps4_wall_mount_top.stl | 147.8KB | |
| ps4_wall_mount_v4.stl | 358.3KB |
