Prusa MK3S Raspberry Pi Camera Mount – By Clip-Fastening 3D Printer Model
The file 'Prusa MK3S Raspberry Pi Camera Mount – By Clip-Fastening 3D Printer Model' is (stl) file type, size is 332.9KB.
The file 'Prusa MK3S Raspberry Pi Camera Mount – By Clip-Fastening 3D Printer Model' is (stl) file type, size is 332.9KB.
The mounting of this bracket is achieved by clip-fastening!
The development of this camera mount was inspired by various mounts that can be found here on Thingiverse. As it is, none of them was exactly what I had in mind. That's why I decided to design another mount.
The following conditions should be fulfilled:
The extension parts were inspired by https://www.thingiverse.com/thing:3188580
In thie video below I show a short version (2 Elements) and a long version (5 elements).
The long version gives you the possibility to capture the display of the printer and the print object simultaneously in the camera image.
The camera case and the connector are a remix of https://www.thingiverse.com/thing:3121052. The main reason why I decided to take this camera box was that the camera could be aligned even more precisely due to the ball head on the connecting piece and that the back front was for clipping.
Screws: M3x20 (amount depending on the number of extensions) and M3x25 (1x) plus nuts and washers
I recommend in any case to use washers, even if it is a little fiddly to install them.This will improve the mobility of the individual elements.
| Raspberry_Camera_case_back.stl | 181.6KB | |
| Raspberry_Camera_case_connector.stl | 311.7KB | |
| Raspberry_Camera_case_front.stl | 394.9KB | |
| Raspberry_Camera_extender.stl | 34.0KB | |
| Raspberry_Camera_mount_clip_left.stl | 101.2KB | |
| Raspberry_Camera_mount_clip_right.stl | 101.4KB | |
| Raspberry_Camera_mount_connector.stl | 18.6KB |
