A camera mount for the Prusa Mini. If you use octoprint or any other software you want to use with a camera to monitor your 3D print, you can use this camera mount. The mount clips over the stepper motor on the Y axis.
The only thing you will need next to the printed parts I a set of M3 nut & bolt (which is long enough)
I've added a camera mount with support for a NeoPixel 12 LED ring. Which you can control with octoprint and the status LED plugin. I manually soldered 4 angled pins on it and glued it to the mount with superglue.
The wiring is as followed:
USB ground to ground neopixel-ring (black wire)
USB VCC to power neopixel-ring (red wire)
Pin 10 (or any pin you use with the Status LED plugin) to the DI (digital in) on the neopixel-ring (yellow)
| camera-cap-raspberry-pi-prusa-mini.stl | 5.4KB | |
| camera-clip-raspberry-pi-prusa-mini.stl | 49.0KB | |
| camera-mount-raspberry-pi-prusa-mini.stl | 38.9KB | |
| camera-mount-with-neo-pixel-led-ring.stl | 82.3KB |
