I made some parts to my new build of a Prusa I3 Steel 2.01.
Most of the parts i´m using is this http://www.thingiverse.com/thing:1054909.
But i want to use 8 mm leadscrews instead of M5 threaded rods for Z.
I drilled a 9 mm hole in the X-idlers to let the leadscrew thru.
Then i´m using my part Leadscrew_Antiwobble_Left and right to Z.
At the top I bult a new top part thats center the leadscrew with a bearing.
I also made som belt pullys to use normal 624 bearings to Y and X. The normal steel Y idler has a very big hole for the screw so i made som adapters to fit normal M4 bolts.
I also made an extension plate for the extruder (http://www.thingiverse.com/thing:678089) without this extension the extruder crash in to the frame in top.
| Cable_Holder_Extruder.stl | 74.9KB | |
| Extruder_ext_CharlStruder.stl | 46.8KB | |
| Knop.stl | 607.5KB | |
| leadscrew_Antiwobler_v2.stl | 126.4KB | |
| M3_Knob.stl | 2.5MB | |
| Plate_Holder_part1.stl | 75.0KB | |
| Plate_Holder_part2.stl | 75.0KB | |
| Plug_YPully.stl | 116.8KB | |
| XBelt_Pully_624_v2.stl | 57.3KB | |
| YBarStopper_P3SteelXL.stl | 14.0KB | |
| YBelt_Pully_624_v2.stl | 118.1KB | |
| Y_Endstop_adjust.stl | 395.2KB | |
| Y_Endstop_Mount.stl | 99.8KB | |
| Z_Endstop_Holder.stl | 72.5KB | |
| Z_Top_Holder_Left.stl | 190.6KB | |
| Z_Top_Holder_Right.stl | 190.4KB |
