Thank you for your interest in my camera mount for the Raspberry Pi HQ camera.
For the still quite new HQ camera, I couldn't find a suitable holder for mounting on the X-Stepper, so I'm publishing my own design here. The HQ camera with wide angle lens (CS mount) is heavy, so the arm of the holder must be very stable. I use PETG filament, printed with 5 perimeters and 50% infill. The holder for the camera is also adjustable in height.
The following material is also required to assemble the holder:
4x screw M2.5 x 10mm & M2.5 hex nut (camera).
2x screw M3 x 6mm & M3 hex nut (height adjustment).
2x screw M3 x 14 (16) mm & M3 nyloc nut (arm attachment).
1x screw M3 x 18mm (stepper fastening).
optional:
1x USB touch dimmer lamp.
Update 03/21:
RPi_HQCam_Back V1.3 with additional strain relief for the ribbon cable, needs 2 x screw M3x6mm & 2 x hex nut M3.
Links:
https://www.raspberrypi.org/products/raspberry-pi-high-quality-camera/
https://www.youtube.com/watch?v=VDWORgW31Sw&feature=emb_imp_rv_oc
https://www.youtube.com/watch?v=MVgr302PNwY&feature=emb_rel_end
https://www.amazon.de/gp/product/B07Z38K8MK/
| RPi_HQCam_Arm_M2_V1R1.stl | 1020.9KB | |
| RPi_HQCam_Arm_Swivel_V1R1.stl | 657.4KB | |
| RPi_HQCam_Back_LampCSI_V1R1.stl | 886.4KB | |
| RPi_HQCam_Back_LampCSI_V1R3.1.stl | 474.6KB | |
| RPi_HQCam_Back_LampUSB_V1R1.stl | 821.5KB | |
| RPi_HQCam_Back_LampUSB_V1R3.stl | 456.8KB | |
| RPi_HQCam_Back_V1R1.stl | 762.6KB | |
| RPi_HQCam_Back_V1R3.stl | 438.2KB | |
| RPi_HQCam_Holder-10_V1R1.stl | 232.0KB |
