Prusa I3 MK2 Dual Fan Duct 3D Printer Model
The file 'Prusa I3 MK2 Dual Fan Duct 3D Printer Model' is (stl) file type, size is 279.1KB.
The file 'Prusa I3 MK2 Dual Fan Duct 3D Printer Model' is (stl) file type, size is 279.1KB.
More available at http://prusamk2.com
Made for the Prusa i3 mk2. Blasts the air on each side of your print, preventing part curling and greatly increase the ability to print more extreme overhangs and improved bridging.
Print in petg, abs or PC. Pre sliced gcode for petg included.
Support is built in for the lower Mount hole. Trim off after print completes.
Duct should be mounted with the mount plate behind the parts blower fan then secured in place with screws.
Note: Works with a E3D Silicone sock in place as well.
Have also ran a 30 minute test at 245 nozzle temp with fan off. No melting or drooping with E3D Silicone sock on heater block.
Suitable for either the MK2 or MK2S.
| Pruse_Tripple_duct_coolong_duct.stl | 826.4KB |
