Prusa I3 Ikea LACK Enclosure 3D Printer Model
The file 'Prusa I3 Ikea LACK Enclosure 3D Printer Model' is (stl) file type, size is 1.7MB.
The file 'Prusa I3 Ikea LACK Enclosure 3D Printer Model' is (stl) file type, size is 1.7MB.
This is a case made using the Ikea LACK as a Base. I made some parts and remixed some, overall it is very easy to both print and make.
Things to buy:
50 cm x 50 cm Polystyrol panels (I had 2.6mm thickness for the side and 5mm for the front)
10 M4x8 Screws
4 M4x16 Screws
4 M4 Nuts
4 608 Bearings
10 Wood Screws you have lying around, around 4 mm thickness
Magnetic Tape
A Xaiomi USB LED-Light and a USB-Cable to solder it to - then just plug it into the pi.
| back_corner_2x.stl | 107.1KB | |
| camera_arm.stl | 89.4KB | |
| camera_case.stl | 96.1KB | |
| camera_case_with_light_bar.stl | 88.0KB | |
| camera_plate.stl | 7.6KB | |
| filament_hole.stl | 30.8KB | |
| handle_2x.stl | 120.0KB | |
| left_corner.stl | 57.7KB | |
| right_corner.stl | 57.7KB | |
| spool_holder_arm.stl | 13.1KB | |
| spool_holder_base.stl | 113.4KB | |
| spool_holder_nut.stl | 1.5MB | |
| spool_holder_screw_4x.stl | 1.5MB | |
| spool_holder_spacer_4x.stl | 57.2KB | |
| spool_holder_tire_4x.stl | 223.1KB | |
| top_magnet_strip_holder.stl | 28.1KB |
