Prusa I3 ANET A8, Z Endstop Adjuster. 3D Printer Model
The file 'Prusa I3 ANET A8, Z Endstop Adjuster. 3D Printer Model' is (stl) file type, size is 169.6KB.
The file 'Prusa I3 ANET A8, Z Endstop Adjuster. 3D Printer Model' is (stl) file type, size is 169.6KB.
Update Remix this to allow use of optical endstop.
After having to use the poorly designed Z stop adjust for too long, here's a mod that is based on a few different "things" I've seen on here.
Simply remove the two left bolts from LHS Z motor, place motor mount over and replace old bolts with ones 2mm longer (M3 x 12mm).
Attach micro switch to the mount using two M2 14mm bolts and nuts ( I used some locktite here once in correct place).
On the adjuster there is a cut out for an M4 nut (very tight fight to ensure no backlash, so you may have to file out or use a soldering iron to fit the nut).
Once nut is fitted thread thru a M4 Bolt/Screw ( For belts and braces i also added another nut to act as a lock nut).
Now lower the Z axis down slowly towards the micros switch and ensure everything lines up. Now tighten the microswitch in place with the M2 Bolts and nuts.
Good Luck.
| reworked_for_a8_adjuster.stl | 385.2KB | |
| Support_Z_Endstop_Z_motor_mount_for_a8.stl | 218.3KB |
![[Updated] Tom’s Easy Spool Holder With 8mm Rod For Prusa I3 MK2 (or Plus) V3 3D Printer Model](https://cdn.3axis.co/assets/14/36/e6/29/1436e629-3c20-4221-8e7f-37c32896f2f3/images/830c7e8c-6eef-4d2d-84be-d4d09f2a00b0_thumb.jpg)
