This is a version of the Proteus Proxy with a detailed interior.
| Assault_Cannons.stl | 468.9KB | |
| Auto_Cannons.stl | 231.9KB | |
| Center_Cap_Hatch.stl | 586.2KB | |
| Center_Top_Finished.stl | 545.0KB | |
| Command_Seat_Combined.stl | 1.4MB | |
| Command_Seat_With_Driver.stl | 26.9MB | |
| Command_Seat_with_Drivers_legs.stl | 4.9MB | |
| Door_Framed.stl | 77.5KB | |
| Driver_Legs.stl | 3.5MB | |
| example.stl | 26.9MB | |
| Exhaust_pipes_Repaired.obj | 720.2KB | |
| Exhaust_X2.stl | 460.0KB | |
| Front_Bench.stl | 73.3KB | |
| Heavy_Bolters.stl | 81.3KB | |
| Heavy_Bolter_Sponson.stl | 316.9KB | |
| Hull_Lower.stl | 23.6MB | |
| Hull_Top.stl | 695.6KB | |
| interior_hatch.stl | 78.0KB | |
| Interior_Wall_Finished.stl | 227.7KB | |
| Ladder_Hatch_Detailed.stl | 82.4KB | |
| Left_Side_No_Track.stl | 10.4MB | |
| Left_Side_No_Track_Inner.stl | 5.0MB | |
| Left_Side_No_Track_Outer.stl | 6.5MB | |
| Left_Side_Tracked.stl | 11.4MB | |
| Left_Side_Tracked_Inner.stl | 5.8MB | |
| Left_Side_Tracked_Outer.stl | 7.3MB | |
| Left_Sponson.stl | 1.7MB | |
| Left_Sponson_Lower.stl | 135.6KB | |
| Rear_Bench.stl | 120.8KB | |
| Right_Side_No_Track.stl | 10.5MB | |
| Right_Side_No_Track_Inner.stl | 5.0MB | |
| Right_Side_No_Track_Outer.stl | 6.5MB | |
| Right_Side_Tracked.stl | 11.5MB | |
| Right_Side_Tracked_Inner.stl | 5.8MB | |
| Right_Side_Tracked_Outer.stl | 7.3MB | |
| Right_Sponson.stl | 1.7MB | |
| Right_Sponson_Lower.stl | 135.6KB | |
| Sponson_Center_Left.stl | 68.1KB | |
| Sponson_Center_Right.stl | 68.1KB | |
| Track_Inner.stl | 773.7KB | |
| Track_Outer.stl | 773.7KB | |
| Turret_Base.stl | 46.9KB | |
| Twin_Lascannon_x2.stl | 408.3KB |
