I do aircraft modeling and often have to use lipo batteries, which have balancing wires for proper charging, but these wires are weak and can break when used because when you disconnect the connector from the charger, you pull the wires, not the connector. To fix this, I created a protection model for the wires and connector. It protects the connector from damage and short circuits, and the wires from pulling and kinks. It is also very convenient to use this protection because you do not need to pull the wires or cling to the connector with your nails. The protection is very light and compact because of this, the battery can be used on any models.
This protection model has a lot of complex surfaces and small details, so I recommend to set high quality printing. I also recommend putting a large filling.
| housing_for_balance_connector_side_1.stl | 53.5KB | |
| housing_for_balance_connector_side_2.stl | 62.0KB |
