Protection Box For Headplay PCS Liberator. 3D Printer Model
The file 'Protection Box For Headplay PCS Liberator. 3D Printer Model' is (STL) file type, size is 347.6KB.
The file 'Protection Box For Headplay PCS Liberator. 3D Printer Model' is (STL) file type, size is 347.6KB.
A protective box for the Liberator control box that comes with the Headplay PCS goggles.
I designed it with FPV in mind. It has a latch for hanging on your belt or pocket, and an opening to pass battery wires through to reach the outside plug. The Liberator installs in the box WITHOUT the stock battery lid attached.
I found that the best video quality and stability was achieved by using a separate CVBS to VGA converter (this one: http://www.ebay.com/itm/CVBS-S-Video-To-VGA-Mini-Converter-Upscaler-1080P-/252262796609). The convertered can be powered via USB cable from the Liberator.
Print in the orientation they open. The top part needs support under the connector brace. The bottom part doesn't need support.
| Box02bottom.STL | 665.5KB | |
| Box02top.STL | 524.4KB |
