I own a Prophete Navigator 7.3 e-Bike and the clamp for the bike computer, which controls the speed and lights has broken off. This is a replacement for the hinge mechanism.
Additional parts: 1x M4 Bolt and Nut, 1x M2 Bolt
Assembly:
1) Drill out the small hole in the 3D print with a 2.5mm (screw in) or 3mm (loose fit).
2) Drill out the small hole in the hinge mechanism on the computer with a 2.5mm or tap an M2 thread.
3) Screw everything together
| Prophete_Bike_Computer_Clamp.stl | 102.0KB |
