These housing port plugs are used for the Propain Hugene2 mountain bike. I don't know if they will fit the Tyee or the Hugene 1st gen, but you can give it ago. I included the SolidWorks CAD files so you can make modifications as you feel necessary. I did design a separate plug for the chainstays, but the downtube plug fit just fine. Note: you'll have to remove the chainstay guard to plug the port closest to the drive side crank arm.
I just made a minor adjustment to the "Housing Port Plugs - Headtube2" version of the plug for the headtube port. the file "Housing Port Plugs - Headtube3" may fit slightly better than the previous version. I haven't printed this one yet, but if you do, let me know what you think.
Check the print speed of the TPU you are using. There are some faster printing TPU's that are 60+mm/s. The Overture 3d brand I used is rated between 20-40mm/s. I also prefer the Gyroid infill because of it's strength in all directions. Note, I did apply a 6 line brim to help with adhesion to the bed.
| Housing_Port_Plugs_-_Downtube-Chainstay.SLDPRT | 132.8KB | |
| Housing_Port_Plugs_-_Downtube-Chainstay.STL | 229.1KB | |
| Housing_Port_Plugs_-_Headtube2.SLDPRT | 130.0KB | |
| Housing_Port_Plugs_-_Headtube2.STL | 356.7KB | |
| Housing_Port_Plugs_-_Headtube3.SLDPRT | 178.2KB | |
| Housing_Port_Plugs_-_Headtube3.STL | 396.7KB |
