Prop Stop 45mm X 5mm (for Pichler Prop Adapter) 3D Printer Model
The file 'Prop Stop 45mm X 5mm (for Pichler Prop Adapter) 3D Printer Model' is (stl) file type, size is 89.9KB.
The file 'Prop Stop 45mm X 5mm (for Pichler Prop Adapter) 3D Printer Model' is (stl) file type, size is 89.9KB.
This is a prop stop, with 45mm centers and a 5mm bore.
Designed to enable the props to go no further than 180 degress, and to fold backwards to approximately 110 degrees (to stop crossover).
Build with the Aero-naut CAMcarbon props in mind. The 5mm bore was needed to fit a T-motor F90 1500 motor as a pusher for the AtomRC Dolphin.
Added weight = 3g.
May require a little filing/sanding (depending on your printer).
| Prop_Stop_45mm_x_5mm_v03.stl | 318.1KB |
