This is a washer or dryer door proper opener.......:) It's to prop open your washer or dryer to air them out and dry out after a load.
The stock end dimensions are 0.70in wide by 0.62in high. Check your units slot size. You could scale this up or down in your slicer to fit your unit. It is roughly 8.20in Long and has a .201in diameter hole in the end. I just used a short 1/4-20 button head cap screw for the post that hooks in the door.
It is printed with lettering face down and depending on your machine you may or may not need supports.
| Washer_Door_Propper_v2.stl | 215.7KB |
