This is Ceiling mount for "S1 LED LCD (WVGA) Mini Video Projector".
(https://www.amazon.com/WVGA-Mini-Video-Projector-International/dp/B00ZOI31K4/ref=sr_1_7?s=electronics&ie=UTF8&qid=1473056314&sr=1-7&keywords=projector)
It is 200mm higher. If you use printer witch is delta type, It is no matter.
However If you use XYZ type printer, It has limited by Z-axis.
So I made shorter version STL model.
To use shorter model extend with bolts as you want tall.
You need....
1/4" x (12mm~20mm) bolt and nut (for projector mount) x1
M5 x 30mm~ bolt and nut ( You can use 10/32" instead) x4
M5 x 50mm~ wood screw x4(for ceiling)
Ball Head Camera Mount x1
(I use HAKUBA Free ball Mount
http://www.hakubaphoto.jp/products/detail/0101930183-4H-00-00 ）
(You can use below instead)
https://www.amazon.com/Professional-Mini-Ball-Camera-Mount/dp/B000L47AHG/ref=sr_1_1?s=electronics&ie=UTF8&qid=1473057463&sr=1-1&keywords=camera++platform+head
https://www.amazon.com/Abonnyc-Ballhead-Bracket-brackets-Photography/dp/B00VAH3KWC/ref=sr_1_11?s=electronics&ie=UTF8&qid=1473057463&sr=1-11&keywords=camera++platform+head
）
optional...
1in x 4in x 2ft wood x1
M5 x 50mm~ wood screw x6~8(for between wood and ceiling)
| projectortsurigu1.stl | 305.7KB | |
| projectortsurigu2.stl | 104.4KB | |
| projectortsurigu2shrottype.stl | 436.7KB |
