One little project
| 2x_ristitala.stl | 1.4KB | |
| 2x_serv.stl | 6.3KB | |
| alus.stl | 72.9KB | |
| Axle_shaft_spline_Scaled.stl | 62.2KB | |
| Axle_tube_Scaled.stl | 155.9KB | |
| Axle_wheel_flange_Scaled.stl | 284.8KB | |
| Bearing_retainer_Scaled.stl | 232.4KB | |
| belt_wheel_big.STL | 359.6KB | |
| belt_wheel_small_x2.STL | 137.9KB | |
| cam_tip_x2.STL | 76.0KB | |
| cam_x2.STL | 163.8KB | |
| crank_asm_jig.STL | 83.1KB | |
| crank_pin_x3.STL | 44.8KB | |
| crank_unit_x4.STL | 75.3KB | |
| cylinder_block.STL | 2.5MB | |
| cylinder_head_x2.STL | 2.2MB | |
| Drum_backing_plate_Scaled.stl | 412.5KB | |
| Drum_Scaled.stl | 340.0KB | |
| exhaust_manifold_L.STL | 5.2MB | |
| exhaust_manifold_R.STL | 5.2MB | |
| Fabulous_Hillar.stl | 21.4KB | |
| floor_pan_bent.stl | 267.9KB | |
| Formed_center_diff_housing_-_COVER_Scaled.stl | 336.2KB | |
| Formed_center_diff_housing_Scaled.stl | 636.0KB | |
| G-8-MOD_engine_all.STL | 36.9MB | |
| HEMI_märk.stl | 239.4KB | |
| HEMI_märk1.stl | 25.1KB | |
| hotrod_1pt9_freewheel_back_section.stl | 597.4KB | |
| hotrod_1pt9_freewheel_front_section.stl | 1.3MB | |
| hotrod_1pt9_freewheel_ring_section_B.stl | 106.4KB | |
| hotrod_grille.stl | 99.1KB | |
| hotrod_kast.stl | 1.0MB | |
| Jack_stand_base_Scaled.stl | 247.9KB | |
| Jack_stand_lever_Scaled.stl | 14.9KB | |
| Jack_stand_post_Scaled.stl | 55.7KB | |
| Jack_stand_tooth_Scaled.stl | 18.8KB | |
| klaas.stl | 4.0KB | |
| led_grill.stl | 396.5KB | |
| main_bearing_x2.STL | 111.3KB | |
| output_gear.STL | 395.2KB | |
| output_tip_x2.STL | 48.5KB | |
| piston_rod_x8.STL | 348.3KB | |
| piston_x8.STL | 117.6KB | |
| PI_Recaro_seat.stl | 8.6MB | |
| raam_esimene.stl | 32.9KB | |
| raam_tagumine.stl | 23.7KB | |
| radiator_cover_001.stl | 799.0KB | |
| radiator_truss_bent.stl | 69.0KB | |
| ratrod_raam.stl | 12.6KB | |
| ratrod_raam1.stl | 57.4KB | |
| rat_rod_lambid.stl | 174.4KB | |
| shell_021.stl | 14.5MB | |
| super_chrager.stl | 992.7KB | |
| super_chrager1.stl | 198.4KB | |
| super_chrager2.stl | 267.9KB | |
| super_chrager3.stl | 274.9KB | |
| transmission_tunnel_001.stl | 1.4MB | |
| valve_cap_x8.STL | 529.6KB | |
| valve_holder_x2.STL | 850.9KB | |
| valve_x8.STL | 380.6KB |
